Body
Rear Door Quarter Glass Removal/Installation
In this manual: Body
~1min read
1. Fully lower the rear door glass.
2. Disconnect the negative battery cable..
3. Remove the rear door trim..
4. Remove the service hole cover.

5. Remove the hole plug.

6. Remove the screw.
7. Remove the bolt A and B.
8. Remove the rear door glass guide.

9. Remove the pin. (5HB)

10. Slide the rear door quarter glass in the direction of the arrow (1) shown in the figure.

11. Remove the rear door quarter glass and rear door quarter glass guide as a single unit in the direction of the arrow (2) shown in the figure.
12. Remove the rear door quarter glass from the rear door quarter glass guide.

13. Install in the reverse order of removal.
Test yourself
A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?