Mazda 3 Quiz
Body

Rear Wiper And Washer Switch Inspection

In this manual: Body
Vehicle general — 15Accessories — 111Body — 339Brakes — 71Drivetrain — 143Electrical — 58Engine — 251HVAC — 72Restraints — 15Steering — 32Suspension — 41
~1min read

1. Disconnect the negative battery cable..

2. Remove the following parts:

a. Front scuff plate (Driver‘s side).

b. Front side trim (Driver‘s side).

c. Hood release lever.

d. Lower panel.

e. Column cover.

f. Wiper and washer switch.

3. Verify that the continuity between the rear wiper and washer switch terminals is as indicated in the table.


  • If not as indicated in the table, replace the wiper and washer switch.

Test yourself

A quick Mazda 3 quiz: every answer comes with an explanation and a link to the manual page.