Mazda 6 Quiz
Body electrical system

Actuator cable removal

In this manual: Body electrical system
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the plug hole plate.

2. Remove the cover from the cruise actuator. (See CRUISE ACTUATOR REMOVAL/INSTALLATION.)

3. Remove the installation nut and pull the cruise actuator toward you.

4. Move the throttle, and remove the end fitting of the actuator cable from the throttle.


5. Squeeze the hooks of the grommet, and remove the actuator cable.

6. Remove the actuator cable from the bracket


7. Remove the end fitting of the actuator cable from the cruise actuator.


8. Squeeze the hooks of the grommet, and remove it from the cruise actuator.


9. Remove the actuator cable.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.