Mazda 6 Quiz
Cooling system

Fan motor

In this manual: Cooling system
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
COOLING FAN REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the shroud panel. (See SHROUD PANEL REMOVAL/INSTALLATION.)

3. Remove the A/C pipe stay.

4. Remove the ATX pipe stay (ATX).

5. Remove in the order indicated in the table.

6. Install in the reverse order of removal.



COOLING FAN MOTOR REMOVAL/INSTALLATION

1. Remove the cooling fan. (See COOLING FAN REMOVAL/INSTALLATION.)

2. Remove in the order indicated in the table.

3. Install in the reverse order of removal.



COOLING FAN MOTOR INSPECTION

1. Verify that the battery is fully charged.

2. Connect battery positive voltage and an ammeter to the fan motor connector.

3. Verify that the fan motor operates smoothly at the standard current draw.

  • If not as spcifid, replace the fan motor.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.