Mazda 6 Quiz
Body

Floor covering

In this manual: Body
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
FRONT FLOOR COVERING REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the front seats. (See FRONT SEAT REMOVAL/INSTALLATION.)

3. Remove the rear seat.

4. Remove the front scuff plates.

5. Remove the rear scuff plates.

6. Remove the console.

7. Remove the front side trims.

8. Remove the B-pillar lower trims.

9. Remove the lower anchor of the front seat belt installation bolts.

10. Remove the tire house trim. (5HB)

11. Remove the fuel-filler lid opener bezel.

12. Remove the fasteners.

13. Remove the cap nuts.

14. Remove the clips.


15. Take the front floor covering off from the passenger-side door opening.

16. Install in the reverse order of removal.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.