Heating

1. Set the mode selector dial to the position.

2. Set the air intake selector to the outside air position (indicator light turns off).

3. Set the temperature control dial to the hot position.

4. Set the fan control dial to the desired speed.

5. If dehumidified heating is desired, turn on the air conditioner.

NOTE

• If the windshield fogs up easily, set the mode selector dial to the position.


• If cooler air is desired at face level, set the mode selector dial at the position and adjust the
  temperature control dial to maintain maximum comfort.
• The air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).