Mazda 6 Quiz
Lubrication system

Oil pump

In this manual: Lubrication system
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
OIL PUMP REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Drain the engine oil. (See ENGINE OIL REPLACEMENT.)

3. Remove the oil pan. (See OIL PAN REMOVAL/INSTALLATION.)

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.

6. Inspect the engine oil level. (See ENGINE OIL INSPECTION.)

7. Start the engine and inspect for oil leakage.

  • If the oil leaks, specify the faulty part and repair or replace it.

8. Inspect the oil pressure. (See OIL PRESSURE INSPECTION.)



Oil Pump Sprocket Removal / Installation Note Install the SST

to the oil pump sprocket to stop the oil pump from turn in.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.