Before Driving

Power Moonroof Reset Procedure

~1min read

If the battery is disconnected, the moonroof will not operate. The moonroof will not operate correctly until it is reset.

Carry out the following procedure to reset the moonroof and resume operation:

1. Switch the ignition ON.

2. Press the tilt switch, to partially tilt open the rear of the moonroof.

3. Repeat Step 2. The rear of the moonroof tilts open to the fully open position, then closes a little.

NOTE

If the reset procedure is performed while the moonroof is in the slide position (partially open) it will close before the rear tilt opens.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.