Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the harness if it is pulled by mistake. Before performing the following procedures, remove the ABS wheel-speed sensor (axle side) and fix it to an appropriate place where the sensor will not be pulled by mistake while servicing the vehicle.
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
Bracket Installation Note
Install the bracket as shown in the figure.
REAR SHOCK ABSORBER INSPECTION
Inspect the rear shock absorber in the same way as the front shock absorber. (See FRONT SHOCK ABSORBER INSPECTION.)
REAR SHOCK ABSORBER DISPOSAL
Dispose the rear shock absorber in the same way as the front shock absorber. (See FRONT SHOCK ABSORBER DISPOSAL.)
?
Test yourself
A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.
