Mazda 6 Quiz
Body electrical system

Rear washer nozzle removal/installation

In this manual: Body electrical system
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Disconnect the negative battery cable.

2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION)

3. Remove the rear washer hose from the rear washer nozzle.

4. Compress the tabs of the rear washer nozzle.

5. Pull the rear washer nozzle out to remove it.


6. Install in the reverse order of removal.

7. Adjust the rear washer nozzle. (See REAR WASHER NOZZLE ADJUSTMENT.)

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.