Mazda 6 Quiz
Fuel and emission control systems

Variable tumble control system (vtcs) shutter valve actuator inspection

In this manual: Fuel and emission control systems
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read

1. Remove the air hose. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.)

2. Disconnect the vacuum hose from the VTCS shutter valve actuator.


3. Connect a vacuum pump to the VTCS shutter valve actuator.

4. Apply vacuum and verify that the rod moves.

  • If the rod dose not move, replace the intake manifold.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.