Mazda 6 Quiz
Manual transaxle

Vehicle speedometer sensor removal/installation

In this manual: Manual transaxle
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
0102030405032N·mlb·ft
Tightening torque found on this page
Without ABS

1. Disconnect the negative battery cable.

2. Remove the battery and battery tray.

3. Remove the air cleaner compornent. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.)

4. Disconnect the vehicle speedometer sensor connector.

5. Remove the vehicle speedometer sensor.

6. Apply transmission oil to a new O-ring and install it on a vehicle speedometer sensor.

7. Install the vehicle speedometer sensor.

Tightening torque 7.8-11.3 N·m
{80-115 kgf·cm, 57.6-83.3 in·lbf}

8. Connect the vehicle speedometer sensor connector.

9. Install the air cleaner compornent. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION.)

10. Install the battery and battery tray.

11. Connect the negative battery cable.

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.