Panoramic sunroof sunshade control

Important safety notes

WARNING

Make sure no one is trapped while opening or closing the sunshades.

The sunshades protect against solar radiation. The 2 sunshades can be opened or closed simultaneously only if the panoramic sunroof is closed.

Opening and closing

Overhead control panel

1. 1
   Opening
2. 2
   Opening
3. 3
   Closing

• Turn the key to position 1 or 2 in the ignition switch.
• Push or pull the button
  in the corresponding direction.

If you press the buttonpast the resistance point,
you trigger automatic movement in the corresponding direction. You can stop the automatic movement by pressing the button again.

Resetting the panoramic sunroof and sunshades

If, after the reset, the panoramic sunroof and sunshades cannot be fully opened or closed, contact a qualified workshop.

If the panoramic sunroof and sunshades open or close only in jerks, reset them:

• Turn the key to position 1 or 2 in the ignition switch.
• Press the buttonin
  the direction of arrow 2 up to the resistance point and hold it until the panoramic sunroof is opened approx. 10 cm.
• Pull the buttonseveral
  times in the direction of arrow 3 up to the resistance point and hold it pulled until the panoramic sunroof is fully closed.
• Hold the buttonin this
  position for another 1 second.
• Press the buttonin
  the direction of arrow 2 up to the resistance point and hold it until the sunshades open 10 cm.
• Pull the button repeatedlyin the direction of arrow 3 up to the
  resistance point and hold it pulled until the sunshades are fully closed.
• Hold the buttonin this
  position for another 1 second.
• Check that you can again fully open and close the panoramic sunroof and sunshades.
• If this is not the case, repeat the steps above.