Do-it-yourself
Drive belt
In this manual: Do-it-yourself
5steps
~30min
2/5difficulty
Done 0 of 5

- Alternator
- Drive belt auto-tensioner
- Crankshaft pulley
- Air conditioner compressor
- Water pump
WARNING
- Make sure the ignition switch is in the OFF or LOCK position before inspecting or servicing the drive belt. The engine could rotate or start unexpectedly and cause serious injury.
1. Visually inspect the drive belt for abnormal wear, cracks, cuts, fraying, or other visible deterioration. If the belt is damaged or in poor condition, have it replaced. It is recommended that you visit an authorized Mitsubishi Motors dealer for this service.
2. Have the drive belt condition inspected regularly as part of normal Mitsubishi Outlander maintenance.
Was this page helpful?