Cruise Control & Driver Assistance
Additional Service When Replacing Chassis Control Module
In this manual: Cruise Control & Driver Assistance
4steps
~24min
2/5difficulty
Done 0 of 4
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the chassis control module. For details the operation, refer to “CONSULT Operation Manual”.
Work Procedure [After Replacing Chassis Control Module]
WRITING VEHICLE SPECIFICATION
With CONSULT
Perform writing vehicle specification to chassis control module according to "Replace ECU" in CONSULT Operation Manual.
>>GO TO 2.
PERFORM NECESSARY WORK
With CONSULT
Perform configuration. Refer to Work Procedure.
Perform MAC key writing. Refer to Work Procedure.
Perform self-diagnosis for “CHASSIS CONTROL”.
Erase the memory of self-diagnosis results.
WORK END
Was this page helpful?