Suspension

Diagnosis and Repair Work Flow

5steps
~30min
2/5difficulty
Done 0 of 5

Work Flow

DETAILED FLOW

INTERVIEW FROM THE CUSTOMER

>>

GO TO 2.

CHECK SYMPTOM

Reproduce the symptom that is indicated by the customer, based on the information from the customer obtained by the interview. Also check that the symptom is not caused by fail-safe mode. Refer to Fail-safe.

>>

GO TO 3.

PERFORM SELF-DIAGNOSIS

With CONSULT

  1. Perform self-diagnosis for “CHASSIS CONTROL”.

Is DTC detected?

YES>>

Record or print self-diagnosis results and freeze frame data (FFD). GO TO 4.

NO>>

INSPECTION END

PERFORM DTC DIAGNOSIS PROCEDURE

With CONSULT

Perform DTC confirmation procedures for the error-detected system.

Is DTC detected?

YES>>

GO TO 5.

NO>>

Check harness and connectors based on the information obtained by the interview.

REPAIR OR REPLACE ERROR-DETECTED PARTS

  1. Repair or replace error-detected parts.

  2. Reconnect part or connector after repairing or replacing.

  3. When DTC is detected, erase self-diagnosis results for “CHASSIS CONTROL”.

>>

GO TO 6.

FINAL CHECK

With CONSULT

  1. Check the reference value for “CHASSIS CONTROL”.

  2. Recheck the symptom and check that the symptom is not reproduced on the same conditions.

Is the symptom reproduced?

YES>>

GO TO 3.

NO>>

INSPECTION END

Diagnostic Work Sheet

Description

  • In general, customers have their own criteria for a symptom. Therefore, it is important to understand the symptom and status well enough by interviewing the customer about the symptom carefully. To systemize all the information for the diagnosis, prepare the interview sheet referring to the interview points.

  • In some cases, multiple conditions that appear simultaneously may cause a DTC to be detected.

INTERVIEW SHEET SAMPLE

Interview sheet
Customer nameMR/MSRegistration numberInitial year registration
vehicle typeVIN
Storage dateEngine / Traction motorMileagekm ( Mile)
Symptom □ Does not operate ( ) function
□ Warning lamp for ( ) turns ON.
□ Noise □ Vibration

□ Other

( )
First occurrence □ Recently □ Other ( )
Frequency of occurrence □ Always □ Under a certain conditions of □ Sometimes ( time(s)/day)
Climate conditions □ Irrelevant
Weather □ Fine □ Cloud □ Rain □Snow □ Others ( )
Temperature □ Hot □Warm □ Cool □ Cold □ Temperature [Approx. °C ( °F)]
Relative humidity □ High □ Moderate □ Low
Road conditions

□ Urban area □ Suburb area □ Highway

□ Mountainous road (uphill or downhill) □ Rough road
Operating condition, etc.

□Irrelevant

□When traction motor starts □ During idling

□ During driving □ During acceleration □ At constant speed driving

□ During deceleration

□ During cornering (right curve or left curve)

□ When steering wheel is steered (to right or to left)
Other conditions

vehicle equipment

Memo