Heater & Air Conditioning Control System Type 4
A/C control
In this manual: Heater & Air Conditioning Control System Type 4
~1min read
Exploded View

1. Intake door cable 2. Air mix door cable
3. Mode door cable
4. A/C control
5. Intake door lever knob
A. To intake door link B. To air mix door link C. To mode door link
Removal and Installation
REMOVAL
1. Remove A/C finisher. Refer to IP-13, "Removal and Installation".2. Remove A/C control fixing screws (A) and fixing pawls, and then remove A/C control.
: Pawl

3. Disconnect door cable and harness connector from A/C control.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?