Door & Lock type 4
Back door lock
In this manual: Door & Lock type 4
~1min read
Exploded View

1. Back door lock assembly 2. TORX bolt
3. Back door striker
: Do not reuse
: N·m (kg-m, ft-lb)
: Body grease
Door lock
DOOR LOCK : Removal and InstallationREMOVAL
1. Remove the back door lower finisher. Refer to INT-35, "BACK DOOR LOWER FINISHER : Removal and Installation". 2. Remove back door lock assembly mounting bolts.3. Disconnect back door lock connector, and then remove back door lock assembly.
INSTALLATION
Note the following item, and install in the reverse order of removal.
CAUTION:After installation, check back door open/close, and lock/unlock operation.
Emergency lever
EMERGENCY LEVER : Unlock proceduresUNLOCK PROCEDURES
NOTE:
If back door lock cannot be unlocked due to a malfunction or battery discharge, follow the procedures to unlock back door.
2. From inside the vehicle, rotate emergency lever toward lower direction and unlock.

Was this page helpful?