Warning Chime System
Basic inspection
In this manual: Warning Chime System
~1min read
DIAGNOSIS AND REPAIR WORKFLOW Work Flow

OVERALL SEQUENCE

DETAILED FLOW
1.OBTAIN INFORMATION ABOUT SYMPTOMInterview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.
>> GO TO 2.
2.CHECK SYMPTOM • Check the symptom based on the information obtained from the customer.• Check if any other malfunctions are present.
>> GO TO 3.
3.CHECK CONSULT-III SELF-DIAGNOSIS RESULTSConnect CONSULT-III and perform self-diagnosis. Refer to WCS-15, "CONSULT-III Function".
Are self-diagnosis results normal? YES >> GO TO 4.
NO >> GO TO 5.
4.NARROW DOWN MALFUNCTIONING PARTS BY SYMPTOM DIAGNOSISPerform symptom diagnosis and narrow down the malfunctioning parts.
>> GO TO 5.
5.REPAIR OR REPLACE MALFUNCTIONING PARTSRepair or replace malfunctioning parts.
NOTE: If DTC is displayed, erase DTC after repairing or replacing malfunctioning parts.
>> GO TO 6.
6.FINAL CHECKCheck that the warning buzzer in the combination meter operates normally.
Does it operate normally? YES >> INSPECTION END
NO >> GO TO 1.
Was this page helpful?