Engine Cooling System K9K
Basic inspection
In this manual: Engine Cooling System K9K
~1min read
Radiator Inspection
• Be careful not to bend or damage the radiator fins.
Check radiator for mud or clogging. If necessary, clean radiator as follows.
CAUTION:• Be careful not to bend or damage the radiator fins.
• When radiator is cleaned without removal, remove all surrounding parts such as radiator fan, radiator shroud and horns. Then tape the harness and connectors to prevent water from entering.
1. Apply water by hose to the back side of the radiator core vertically downwards. 2. Apply water again to all radiator core surface once per minute. 3. Stop washing if any stains no longer flow out from the radiator.4. Blow air into the back side of radiator core vertically downwards.
• Use compressed air lower than 490 kPa (4.9 bar 5 kg/cm2, 71psi) and keep distance more than 30 cm (11.8 in).
5. Blow air again into all the radiator core surface once per minute until no water sprays out.
Was this page helpful?