Heater & Air Conditioning Control System Type 2

Component parts

In this manual: Heater & Air Conditioning Control System Type 2
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~7min read

Automatic air conditioning system : Component Parts Location

1. BCM

1. BCM
• With Intelligent Key: Refer to BCS- 6, "BODY CONTROL SYSTEM : Component Parts Location". • Without Intelligent Key: Refer to BCS-96, "BODY CONTROL SYSTEM : Component Parts Location". 2. Magnet clutch
3. Refrigerant pressure sensor 4. Ambient sensor
5. ECM
• HR16DE: Refer to EC-455, "ENGINE CONTROL SYSTEM : Component Parts Location". • MR16DDT: Refer to EC-25, "ENGINE CONTROL SYSTEM : Component Parts Location".

• K9K: Refer to EC-813, "Component Parts Location".

6. IPDM E/R
• With Intelligent Key: Refer to PCS- 5, "Component Parts Location". • Without Intelligent Key: Refer to PCS-37, "Component Parts Location". 7. Multi display unit
8. Intake door motor
9. Fan control amp.

10. Air mix door motor
11. Intake sensor
12. In-vehicle sensor
13. Aspirator
14. A/C auto amp.
15. Blower motor
16. Mode door motor
17. Sunload sensor

A. Left side of A/C unit assembly B. Instrument lower panel LH is removed C. Back side of A/C unit assembly D. Multi display unit is removed E. Right side of A/C unit assembly C. Right side of switch panel

Automatic air conditioning system : Component Description

PTC heater control system : Component Parts Location

PTC heater control system : Component Parts Location

1. BCM

1. BCM
• With Intelligent Key: Refer to BCS- 6, "BODY CONTROL SYSTEM : Component Parts Location". • Without Intelligent Key: Refer to BCS-96, "BODY CONTROL SYSTEM : Component Parts Location". 2. Ambient sensor
3. ECM Refer to EC-813.

4. Multi display unit
5. PTC heater
6. A/C auto amp.

A. Left side of A/C unit assembly B. Multi display unit is removed

PTC heater control system : Component Description

A/C unit assembly : Aspirator

A/C unit assembly : Aspirator

The aspirator generates the vacuum by the air blown from the A/C unit assembly and draws the air of the passenger room to the invehicle sensor area via the aspirator duct.

A/C unit assembly : Intake Sensor

A/C unit assembly : Intake Sensor

Intake sensor measures temperature of evaporator fin temperature. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases

A/C unit assembly : Air Mix Door Motor

• Air mix door motor consists of motor that drives door, PBR (Potentio Balance Register) that detects door position and LCU (Local Control Unit) that perform multiplex communication control (LIN) with A/C auto amp.

Refer to HAC-114, "AUTOMATIC AIR CONDITIONING SYSTEM : Door Control".

• Rotation of motor is transmitted to air mix door (upper air mix door, lower air mix door, max. cool door) by link, rod, and lever. Air flow temperature is switched.

A/C unit assembly : Mode Door Motor

• Mode door motor consists of motor that drives door, PBR (Potentio Balance Register) that detects door position and LCU (Local Control Unit) that perform multiplex communication control (LIN) with A/C auto amp.

Refer to HAC-114, "AUTOMATIC AIR CONDITIONING SYSTEM : Door Control".

• Rotation of motor is transmitted to mode door (center ventilator door, side ventilator door, foot door, and defroster door) by link, rod, and lever. Air outlet is switched.

A/C unit assemblyY : Intake Door Motor

• Intake door motor consists of motor that drives door, PBR (Potentio Balance Register) that detects door position and LCU (Local Control Unit) that perform multiplex communication control (LIN) with A/C auto amp.

Refer to HAC-114, "AUTOMATIC AIR CONDITIONING SYSTEM : Door Control".

• Rotation of motor is transmitted to intake door by link and lever. Air inlet is switched.

A/C unit assembly : Blower Motor

• The blower motor utilizes a brush-less motor with a rotating magnet.

• Quietness is improved over previous motors where the brush was the point of contact and the coil rotated.


A/C unit assembly : Fan Control Amp

A/C unit assembly : Fan Control Amp

• Fan control amp., that uses MOS field effect transistor, is adopted for blower motor speed control.

NOTE

:
MOS field effect transistor is a transistor for which the gate portion is composed of a metal electrode on an oxide layer of semiconductor.

Field effect transistor is controlled by voltage, while ordinary transistor is controlled by current. Electrode of field effect transistor is called source, drain, or gate, while electrode of ordinary transistor is called emitter, collector, or base.

• Fan control amp. continuously controls voltage to blower motor, according to gate voltage from A/C auto amp.

• This power transistor does not require a HI relay even when the maximum voltage is applied to blower motor at HI status, because voltage drop is nominal.

A/C unit assembly : PTC Heater

A/C unit assembly : PTC Heater

Heat element is heated and air flow temperature is increased by power supply from PTC relay.

Multi Display Unit

• Multi display unit integrates display and operation switches. • Operation of each switch (A/C operation signal) and setting status (A/C ECO setting signal and ECO mode signal) are transmitted to A/C auto amp. via CAN communication.

• Operation status of air conditioning system is indicated in the display according to A/C display signal that is received from A/C auto amp.

A/C Auto Amp.

A/C auto amp. controls automatic air conditioning system by inputting and calculating signals from each sensor and each switch. A/C auto amp. has self-diagnosis function. Diagnosis of automatic air conditioning system can be performed quickly.

BCM

BCM transmits A/C ON signal and blower fan ON signal from A/C auto amp. to ECM via CAN communication line.

ECM

• ECM, when receiving A/C ON signal and blower fan ON signal from BCM, transmits A/C compressor request signal to IPDM E/R via CAN communication according to status of the engine and refrigerant pressure.

• ECM transmits engine coolant temperature signal to A/C auto amp. via CAN communication line.

IPDM E/R

A/C relay is integrated in IPDM E/R. IPDM E/R operates A/C relay when A/C compressor request signal is received from ECM via CAN communication line.

Ambient Sensor

Ambient sensor measures ambient air temperature. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.

In-vehicle Sensor

In-vehicle sensor measures temperature of intake air that flows through aspirator to passenger room. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.

Sunload Sensor

Sunload sensor measures sunload amount. This sensor converts sunload amount to voltage signal by photodiode and transmits to A/C auto amp.

Refrigerant Pressure Sensor

DESCRIPTION

• The refrigerant pressure sensor converts high-pressure side refrigerant pressure into voltage and outputs it to ECM.

• ECM operates cooling system protection and idle speed control according to voltage value that is input.

STRUCTURE AND OPERATION

STRUCTURE AND OPERATION

• The refrigerant pressure sensor is a capacitance type sensor. It consists of a pressure detection ares and a signal processing area. • The pressure detection area, which is a variable capacity condenser, changes internal static capacitance according to pressure force.

• The signal processing area detects the static capacitance of the pressure detection area, converts the static capacitance into a voltage value, and transmits the voltage value to ECM.

Magnet Clutch

Compressor is driven by the magnet clutch which is magnetized by electric power supply.