Starting and driving

Continuously Variable Transmission (CVT)

~1min read
The ignition lock is designed so that the ignition switch cannot be turned to

The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift lever is moved to the P (Park) position.

• When turning the ignition switch to the LOCK position, make sure that the shift lever is in the P (Park) position.

• When removing the key from the ignition switch, make sure that the shift lever is in the P (Park) position.

When the ignition switch cannot be turned to the LOCK position:

1. Move the shift lever to the P (Park) position. 2. Turn the ignition switch slightly in the ON direction. 3. Turn the ignition switch to the LOCK position.

4. Remove the key.

If the ignition switch is turned to the LOCK position, the shift lever cannot be moved from the P (Park) position. The shift lever can be moved if the ignition switch is in the ON position with the foot brake pedal depressed.

There is an OFF position 1 between the LOCK and ACC positions, although it is not marked on the ignition switch.