Heater & Air Conditioning Control System Type 5
Heater control
In this manual: Heater & Air Conditioning Control System Type 5
~1min read
Exploded View

1. Intake door cable 2. Air mix door cable
3. Mode door cable
4. Heater control
5. Intake door lever knob
A. To intake door link B. To air mix door link C. To mode door link
Removal and Installation
REMOVAL
1. Remove A/C finisher. Refer to IP-13, "Removal and Installation".2. Remove heater control fixing screws (A) and fixing pawls, and then remove heater control.
: Pawl

3. Disconnect door cable and harness connector from heater control.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?