Door & Lock Type 1
Inside key antenna
In this manual: Door & Lock Type 1
~1min read
Instrument center
INSTRUMENT CENTER : Removal and InstallationREMOVAL
1. Remove the multi display unit. Refer to AV-125, "Removal and Installation".2. Remove the inside key antenna (instrument center) (1) mounting clip (A), and then remove inside key antenna (instrument center).
CAUTION:Be careful not to drop mounting clip (A) into instrument panel.
INSTALLATION
Install in the reverse order of removal.
Console
CONSOLE : Removal and InstallationREMOVAL
1. Remove the center console assembly. Refer to IP-23, "Removal and Installation".2. Remove the inside key antenna (console) (1) mounting clip (A), and then remove inside key antenna (console).
INSTALLATION
Install in the reverse order of removal.
Luggage room
LUGGAGE ROOM : Exploded View1. Inside key antenna (luggage room) 2. Clip
: Do not reuse
LUGGAGE ROOM : Removal and Installation
REMOVAL
1. Remove the luggage floor finisher. Refer to INT-29, "Exploded View".2. Remove the inside key antenna (luggage room) (1) mounting clip RH (A).
3. Disengage inside key antenna (luggage room) fixing clip using a flat-bladed screwdriver (A), and then pull out forward the inside key antenna (luggage room).
INSTALLATION
Install in the reverse order of removal.
Replace with new ones if necessary.Was this page helpful?