Safety — Seats, seat belts and supplemental restraint system
Install
In this manual: Safety — Seats, seat belts and supplemental restraint system
~1min read

1. Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the adjustment notch1 must be installed in the hole with the lock knob2 . 2. Push and hold the lock knob and push the head restraint/headrest down.
3. Properly adjust the head restraint/headrest before an occupant uses the seating position.
Was this page helpful?