Interior Lighting System

Interior room lamp power supply circuit

In this manual: Interior Lighting System
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~2min read

Description

Provides the interior room lamp power supply. Also cuts the power supply when the interior room lamp battery saver activating.

Component Function Check

1.CHECK INTERIOR ROOM LAMP POWER SUPPLY FUNCTION

1. Turn ignition switch ON.CONSULT-III ACTIVE TEST


1. Turn ignition switch ON.

2. Turn each interior room lamp ON.

- Map lamp
- Luggage room lamp

3. Select “BATTERY SAVER” of BCM (BATTERY SAVER) active test item.

4. With operating the test items, check that each interior room lamp turns ON/OFF.

Off : Interior room lamp OFF On : Interior room lamp ON

Does each interior room lamp turn ON/OFF? YES >> Interior room lamp power supply circuit is normal.

NO >> Refer to INL-28, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK INTERIOR ROOM LAMP POWER SUPPLY OUTPUT

1. Turn ignition switch OFF.CONSULT-III ACTIVE TEST


1. Turn ignition switch OFF.

2. Disconnect the following connectors.

- Map lamp
- Luggage room lamp

3. Turn ignition switch ON. 4. Select “BATTERY SAVER” of BCM (BATTERY SAVER) active test item.

5. With operating the test item, check voltage between BCM harness connector and ground.

With Intelligent Key

Without Intelligent Key

Without Intelligent Key

Is the inspection result normal?

Is the inspection result normal? YES >> GO TO 2.

NO >> GO TO 3.

2.CHECK INTERIOR ROOM LAMP POWER SUPPLY OPEN CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect the BCM connector.

3. Check continuity between BCM harness connector and each interior room lamp harness connector.

With Intelligent Key

Without Intelligent Key

Without Intelligent Key

Is the inspection result normal?

Is the inspection result normal? YES >> Check for internal short circuit of each interior room lamp.

NO >> Repair or replace harnesses.

3.CHECK INTERIOR ROOM LAMP POWER SUPPLY SHORT CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect the BCM connector.

3. Check continuity between BCM harness connector and ground.

With Intelligent Key

Without Intelligent Key

Without Intelligent Key

Is the inspection result normal?

Is the inspection result normal? YES >> Replace BCM. Refer to BCS-93, "Removal and Installation".

NO >> Repair or replace harnesses.