Interior Lighting System
Luggage room lamp
In this manual: Interior Lighting System
~1min read
Exploded View

1. Bulb housing
2. Bulb
3. Lens
: Pawl
Removal and Installation
CAUTION:Disconnect the battery cable from negative terminal or remove the fuse.
REMOVAL
1. Insert a remover tool (A) into the gap between luggage room lamp and luggage side lower finisher RH.2. Disengage luggage room lamp fixing pawl, and then disconnect luggage room lamp harness connector.
: Pawl
3. Remove luggage room lamp from luggage side lower finisher RH.

INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:• Disconnect the battery cable from negative terminal or remove the fuse. • Never touch the glass of bulb directly by hand. Keep grease and other oily substaces away from it. Never touch bulb by hand while it is lit or right after it is off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with a new one.
LUGGAGE ROOM LAMP BULB
1. Remove the luggage room lamp.
2. Insert a remover tool (A) into the gap between the lens and bulb housing, and then disengage fixing pawls as shown by the arrow in the figure.
: Pawl

3. Remove the bulb.
Was this page helpful?