Magnet clutch
Component Function Check
1.CHECK MAGNET CLUTCH OPERATIONPerform auto active test of IPDM E/R. Refer to PCS-12, "Diagnosis Description" (with Intelligent Key) or PCS- 43, "Diagnosis Description" (without Intelligent Key).
Does it operate normally? YES >> INSPECTION END
NO >> Refer to HAC-232, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK FUSE 1. Turn ignition switch OFF.2. Check 10A fuse (No. 49, located in IPDM E/R).
NOTE: Refer to PG-25, "Fuse, Connector and Terminal Arrangement".
Is the inspection result normal? YES >> GO TO 2.
NO >> Replace the blown fuse after repairing the affected circuit if a fuse is blown.
2.CHECK MAGNET CLUTCH 1. Disconnect compressor connector.2. Directly apply battery voltage to the magnet clutch. Check for operation visually and by sound.
Does it operate normally? YES >> GO TO 3.
NO >> Replace magnet clutch. Refer to HA-88, "MAGNET CLUTCH : Removal and Installation of Compressor Clutch".
3.CHECK MAGNET CLUTCH POWER SUPPLY CIRCUIT FOR OPEN 1. Disconnect IPDM E/R connector.2. Check continuity between IPDM E/R harness connector and compressor harness connector.

Is the inspection result normal? YES >> Replace IPDM E/R. Refer to PCS-34, "Removal and Installation" (with Intelligent Key) or PCS-63, "Removal and Installation" (without Intelligent Key).
NO >> Repair harness or connector.