Engine Lubrication System K9K
Oil pump
In this manual: Engine Lubrication System K9K
~1min read
Exploded View

1. Oil pump drive chain 2. Crankshaft sprocket
3. Oil pump assembly
Removal and Installation
REMOVAL
1. Disconnect the battery cable from the negative terminal. 2. Remove engine under cover. 3. Remove front wheel RH. Refer to WT-7, "Exploded View". 4. Remove fender protector RH. Refer to EXT-22, "Exploded View". 5. Remove drive belt. Refer to EM-276, "Removal and Installation". 6. Remove oil pan. Refer to EM-288, "Exploded View". 7. Remove rear oil seal retainer. Refer to EM-302, "Exploded View". 8. Remove oil pump drive chain. Refer to EM-330, "Disassembly and Assembly".9. Remove oil pump assembly.
INSTALLATION
Install in the reverse order of removal paying attention to the following.
Rear Oil Seal Retainer and Oil Pump • Refer to EM-330, "Disassembly and Assembly".
Was this page helpful?