Parking, license plate and tail lamps are not turned on
Without daytime running light system
WITHOUT DAYTIME RUNNING LIGHT SYSTEM : DescriptionThe parking, license plate, tail lamps and each illumination are not turned ON in any condition.
WITHOUT DAYTIME RUNNING LIGHT SYSTEM : Diagnosis Procedure 1.COMBINATION SWITCH INSPECTIONCheck the combination switch. Refer to BCS-92, "Symptom Table".
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace the malfunctioning part.
2.CHECK TAIL LAMP RELAY REQUEST SIGNAL INPUT
CONSULT-III DATA MONITOR
1. Select “TAIL & CLR REQ” of IPDM E/R data monitor item.
2. With operating the lighting switch, check the monitor status.

Is the inspection result normal? YES >> Replace IPDM E/R.
NO >> Replace BCM. Refer to BCS-93, "Removal and Installation" (with Intelligent Key), BCS-161, "Removal and Installation" (without Intelligent Key).
With daytime running light system
WITH DAYTIME RUNNING LIGHT SYSTEM : DescriptionThe parking, license plate, tail lamps and each illumination are not turned ON in any condition.
WITH DAYTIME RUNNING LIGHT SYSTEM : Diagnosis Procedure 1.COMBINATION SWITCH INSPECTIONCheck combination switch. Refer to BCS-92, "Symptom Table".
Is the combination switch normal? YES >> GO TO 2.
NO >> Repair or replace the malfunctioning part.
2.CHECK TAIL LAMP RELAY REQUEST SIGNAL INPUT
CONSULT-III DATA MONITOR
1. Select “TAIL & CLR REQ” of IPDM E/R data monitor item.
2. With operating the lighting switch, check the monitor status

Is the inspection result normal? YES >> GO TO 3.
NO >> Replace BCM. Refer to BCS-93, "Removal and Installation" (with Intelligent Key), BCS-161, "Removal and Installation" (without Intelligent Key).
3.DAYTIME RUNNING LIGHT RELAY CIRCUIT INSPECTIONCheck the daytime running light relay circuit. Refer to EXL-50, "Component Function Check".
Is the inspection result normal? YES >> Replace IPDM E/R.
NO >> Repair or replace the malfunctioning part.