Audio, Visual & Navigation System Audio with navigation
Power supply and ground circuit
In this manual: Audio, Visual & Navigation System Audio with navigation
~1min read
Navi control unit NAVI CONTROL UNIT : Diagnosis Procedure 1.CHECK FUSE



Check for blown fuses.

Is inspection result OK? YES >> GO TO 2.
NO >> Be sure to eliminate cause of malfunction before installing new fuse.
2.CHECK POWER SUPPLY CIRCUITCheck voltage between NAVI control unit harness connector and ground.

Is inspection result OK? YES >> GO TO 3.
NO >> Check harness between NAVI control unit and fuse.
3.CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect NAVI control unit connector.3. Check continuity between NAVI control unit harness connector and ground.

Is inspection result OK? YES >> INSPECTION END
NO >> Repair harness or connector.
Was this page helpful?