Rear Axle 4WD
Precaution
In this manual: Rear Axle 4WD
~1min read
Precautions for Drive Shaft
• Observe the following precautions when disassembling and assembling drive shaft.
- Never disassemble joint sub-assembly because it is non-overhaul parts. - Perform work in a location which is as dust-free as possible. - Clean the parts, before disassembling and assembling. - Prevent the entry of foreign objects during disassembly of the service location. - Reassemble disassembled parts carefully in the correct order. If work is interrupted, a clean cover must be placed over parts. - Use paper waste. Fabric shop cloths must not be used because of the danger of lint adhering to parts.- Clean disassembled parts (except for rubber parts) with kerosene which shall be removed by blowing with air or wiping with paper waste.
Was this page helpful?