Starting and driving
Precautions on cruise control
In this manual: Starting and driving
~1min read
• If the cruise control system malfunctions, it will cancel automatically. The CRUISE indicator light on the meter panel will then blink to warn the driver. • If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically. • If the CRUISE indicator light blinks, turn the cruise control MAIN switch off and have the system checked by a NISSAN dealer.
• The CRUISE indicator light may blink when the cruise control MAIN switch is turned ON while pushing the ACCEL/RES, COAST/ SET or CANCEL switch. To properly set the cruise control system, perform the following procedures.
WARNING Do not use the cruise control when driving under the following conditions: • when it is not possible to keep the vehicle at a set speed • in heavy traffic or in traffic that varies in speed • on winding or hilly roads • on slippery roads (rain, snow, ice, etc.) • in very windy areas Doing so could cause a loss of vehicle control and result in an accident. CAUTION On Manual Transmission (MT) models, do not shift into N (Neutral) without depressing the clutch pedal when the cruise control is set. Should this occur, depress the clutch pedal and turn the MAIN switch off immediately. Failure to do so may cause engine damage.Was this page helpful?