Starting and driving
Push-button ignition switch operation
In this manual: Starting and driving
~1min read

When the ignition switch is pushed without depressing the brake pedal (Continuously Variable Transmission models) or the clutch pedal (manual transmission models), the ignition switch position will change as follows: • Push once to change to ACC. • Push two times to change to ON. • Push three times to change to OFF. • Push four times to return to ACC.
• Open or close any door to return to LOCK during the OFF position.
The indicator light A on the ignition switch illuminates when the ignition switch is in the ACC or ON position.
Some indicators and warnings for operation are displayed on the meter. (See “Warning/indicator lights and audible reminders” .) Continuously Variable Transmission models
The ignition lock is designed so that the ignition switch position cannot be switched to LOCK until the shift lever is moved to the P (Park) position.
When the ignition switch cannot be pushed toward the LOCK position, proceed as follows: 1. Move the shift lever into the P (Park) position. 2. Push the ignition switch to the OFF position.3. Open the door. The ignition switch will change to the LOCK position.
The shift lever can be moved from the P (Park) position if the ignition switch is in the ON position and the brake pedal is depressed.Was this page helpful?