Heater, air conditioner, audio and phone systems

RearView monitor (if so equipped)

~2min read

When the shift lever is shifted into the R (Reverse) position, the monitor display shows the view to the rear of the vehicle.

The system is designed as an aid to the driver in situations such as slot parking or parallel parking.

WARNING

Failure to follow the warnings and instructions for proper use of the Rear- View Monitor could result in serious injury or death.

• The RearView monitor is a convenience but it is not a substitute for proper backing. Always turn and look out the windows, and check mirrors to be sure that it is safe to move before operating the vehicle.

Always back up slowly. • The system is designed as an aid to the driver in showing large stationary objects directly behind the vehicle, to help avoid damaging the vehicle. • The system cannot completely eliminate blind spots and may not show every object. • Underneath the bumper and the corner areas of the bumper cannot be viewed on the RearView Monitor because of its monitoring range limitation. The system will not show small objects below the bumper, and may not show objects close to the bumper or on the ground. • Objects viewed in the RearView Monitor differ from actual distance because a wide-angle lens is used. • Objects in the RearView Monitor will appear visually opposite than when viewed in the rear view and outside mirrors. • Make sure that the liftgate is securely closed when backing up. • Do not put anything on the Rear- View camera. The RearView camera is installed above the license plate. • When washing the vehicle with high-pressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. • Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. CAUTION Do not scratch the camera lens when cleaning dirt or snow from the lens.