Driveline transfer: TY21B
Refilling
In this manual: Driveline transfer: TY21B
~1min read
1. Remove filler plug (1) and gasket. Then fill oil up to mounting hole for the filler plug.
: Vehicle front
Oil and viscosity : Refer to MA-13, "Fluids and Lubricants".
Oil capacity : Refer to DLN-117, "General Specifications".

CAUTION:
Carefully fill the oil. (Fill up for approximately 3 minutes.) 2. Leave the vehicle for 3 minutes, and check the oil level again.
3. Before installing filler plug, set a new gasket. Install filler plug on transfer and tighten to the specified torque. Refer to DLN-113, "Exploded View".
CAUTION:Never reuse gasket.
Was this page helpful?