Driveline rear final drive: RTVS
Refilling
In this manual: Driveline rear final drive: RTVS
~1min read
1. Remove filler plug (1). Fill with new gear oil until oil level reaches the specified level near filler plug mounting hole
Oil grade and viscosity : Refer to MA-13, "Fluids and Lubricants".Oil capacity : Refer to DLN-167, "General Specification".
2. After refilling oil, check oil level. Set a new gasket to filler plug, then install it to final drive assembly. Refer to DLN-151, "Exploded View".
CAUTION:Never reuse gasket.

Was this page helpful?