Transaxle & transmission 5MT: RS5F92R
Refilling
In this manual: Transaxle & transmission 5MT: RS5F92R
~1min read
1. Remove filler plug (1) and gasket from transaxle case.
Never reuse gasket.
2. Fill with new gear oil until oil level reaches the specified limit at filler plug mounting hole as shown in the figure.
Oil grade and viscosity : Refer to MA-13, "Fluids and Lubricants".Oil capacity : Refer to TM-63, "General Specifications
3. After refilling gear oil, check the oil level. Refer to TM-22, "Inspection".4. Set a gasket on filler plug and then install it to transaxle case.
CAUTION:Never reuse gasket.
5. Tighten filler plug to the specified torque. Refer to TM-33, "Exploded View".

Was this page helpful?