Power Window Control System
Removal and installation
In this manual: Power Window Control System
~1min read
POWER WINDOW MAIN SWITCH Removal and Installation
NOTE:

REMOVAL
1. Remove power window main switch finisher. Refer to INT-13, "Removal and Installation".2. Remove power window main switch (1) from power window main switch finisher (2) using flat-head screw driver (A).
: Pawl
NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).

INSTALLATION
Install in the reverse order of removal.
NOTE:
If power window main switch is replaced or is removed, it is necessary to perform the initialization procedure.
Refer to PWC-16, "Work Procedure".
Was this page helpful?