Power Outlet
Removal and installation
In this manual: Power Outlet
~1min read
POWER SOCKET Exploded View

Removal and Installation


1 : Inner socket
2 : Ring

Removal and Installation
REMOVAL
1. Remove cluster tray. Refer to IP-13, "Removal and Installation".2. Pull out inner socket (1) by pushing the pawl (B) of the ring (2) from the inner socket hole (square) (A).

3. Press the ring pawl from the back of the cluster tray to remove the ring.
: Pawl

INSTALLATION
Note the following, and install in the reverse order of removal.
Align the cut outs of inner socket, ring and cluster tray.
A : Cut out

Was this page helpful?