Unexpected brake pedal reaction
Description
A malfunction of brake pedal feel (height or others) is detected when brake pedal is depressed.
Diagnosis Procedure
1.CHECK FRONT AND REAR AXLECheck that there is no excessive looseness in front and rear axle.
• Front axle- MR16DDT: Refer to FAX-9, "Inspection". - HR16DE: Refer to FAX-41, "Inspection".
- K9K: Refer to FAX-66, "Inspection".
• Rear axle- 2WD: Refer to RAX-4, "Inspection".
- 4WD: Refer to RAX-12, "Inspection".
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace error-detected parts.
2.CHECK DISC ROTORCheck disc rotor runout.
• Front- LHD: Refer to BR-16, "DISC ROTOR : Inspection and Adjustment".
- RHD: Refer to BR-84, "DISC ROTOR : Inspection and Adjustment".
• Rear- LHD: Refer to BR-18, "DISC ROTOR : Inspection and Adjustment".
- RHD: Refer to BR-86, "DISC ROTOR : Inspection and Adjustment".
Is the inspection result normal? YES >> GO TO 3.
NO >> Refinish disc rotor.
• Front- LHD: Refer to BR-16, "DISC ROTOR : Inspection and Adjustment".
- RHD: Refer to BR-84, "DISC ROTOR : Inspection and Adjustment".
• Rear- LHD: Refer to BR-18, "DISC ROTOR : Inspection and Adjustment".
- RHD: Refer to BR-86, "DISC ROTOR : Inspection and Adjustment".
3.CHECK BRAKE FLUID LEACKAGECheck fluid leakage.
• Front- LHD: Refer to BR-30, "FRONT : Inspection".
- RHD: Refer to BR-97, "FRONT : Inspection".
• Rear- LHD: Refer to BR-39, "REAR : Inspection".
- RHD: Refer to BR-105, "REAR : Inspection".
Is the inspection result normal? YES >> GO TO 4.
NO >> Repair or replace error-detected parts.
4.CHECK BRAKE PEDALCheck each item of brake pedal.
• LHD: Refer to BR-9, "Inspection and Adjustment".• RHD: Refer to BR-77, "Inspection and Adjustment".
Is the inspection result normal? YES >> GO TO 5.
NO >> Adjust each item of brake pedal.
• LHD: Refer to BR-9, "Inspection and Adjustment".• RHD: Refer to BR-77, "Inspection and Adjustment".
5.CHECK BRAKING FORCECheck brake force using a brake tester.
Is the inspection result normal? YES >> GO TO 6.
NO >> Check each components of brake system.
6.CHECK BRAKE PERFORMANCEDisconnect ABS actuator and electric unit (control unit) connector so that ABS does not operate. Check that brake force is normal in this condition. Connect harness connectors after checking.
Is the inspection result normal? YES >> Normal
NO >> Check each components of brake system.