Nissan Maxima Quiz
Technical and consumer information

Installing front license plate

In this manual: Technical and consumer information
Nissan Maxima owner's manual — 5Illustrated table of contents — 8SafetySeats, seat belts and supplemental restraint system — 30Instruments and controls — 60Pre-driving checks and adjustments — 34Monitor, climate, audio, phone and voice recognition systems — 94Starting and driving — 35In case of emergency — 9Appearance and care — 17Maintenance and do-it-yourself — 38Technical and consumer information — 35
~1min read
010203040506.45N·mlb·ft
Tightening torque found on this page
Use the following steps to mount the front license

Use the following steps to mount the front license plate:

(1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the drill.

Install the license plate holder using the two screws provided with the holder.

(2)- Mount the license plate using two M6- 14mm bolts.

License plate bolt tightening torque:

3.8 - 4.7 ft-lb (5.10 - 6,4 N·m)

Test yourself

A quick Nissan Maxima quiz: every answer comes with an explanation and a link to the manual page.