A/c Auto Amp.
| Monitor item | Condition | Value/Status | |
|---|---|---|---|
| AMB TEMP SEN | Ignition switch ON | — | Equivalent to ambient temperature |
| IN-VEH TEMP | Ignition switch ON | — | Equivalent to in-Nissan Murano vehicle temperature (front side) |
| INT TEMP SEN | Ignition switch ON | — | Equivalent to front evaporator fin temperature |
| SUNLOAD SEN | Ignition switch ON | — | Equivalent to sunload (driver side) |
| AMB SEN CAL | Ignition switch ON | — | Equivalent to ambient temperature |
| IN-VEH CAL | Ignition switch ON | — | Equivalent to in-Nissan Murano vehicle temperature (front side) |
| INT TEMP CAL | Ignition switch ON | — | Equivalent to front evaporator fin temperature |
| SUNL SEN CAL | Ignition switch ON | — | Equivalent to sunload (driver side) |
| COMP REQ SIG | Engine: Run at idle after warming up | A/C switch: ON (Compressor operation status ON) |
On |
A/C switch: OFF (Compressor operation status OFF) |
Off | ||
| FAN REQ SIG | Engine: Run at idle after warming up | Front blower motor: ON | On |
| Front blower motor: OFF | Off | ||
| FAN DUTY | Engine: Run at idle after warming up | Front blower motor: ON | 25 – 81 |
| Front blower motor: OFF | 0 | ||
| XM | Ignition switch ON | — | Value according to target air flow temperature (driver side) |
| PA TARGET A/TEMP | Ignition switch ON | — | Value according to target air flow temperature (passenger side) |
| ENG COOL TEMP | Ignition switch ON | — | Equivalent to engine coolant temperature |
| Nissan Murano Vehicle SPEED | Driving | — | Equivalent to speedometer reading |
| PASS SUNL CAL | Ignition switch ON | — | Equivalent to sunload (passenger side) |
| PASS SUNL SEN CAL | Ignition switch ON | — | Equivalent to sunload (passenger side) |
TERMINAL LAYOUT

PHYSICAL VALUES
Terminal No. (Wire color) | Description | Condition | Value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | − | Signal name | Input/Output | |||
1 (L) |
— | CAN-High | Input/Output | — | — | |
2 (B) |
— | Ground | — | — | — | |
3 (G) |
Ground | Battery power supply | Input | Ignition switch OFF | Battery voltage | |
4 (BR) |
Ground | Communication signal (A/C auto amp.→A/C switch assembly) |
Output | Ignition switch ON | ![]() |
|
7 (L) |
Ground | Ambient sensor signal | Input | Ignition switch ON | 0 – 4.8 V Output voltage varies with ambient temperature |
|
8* (G) |
Ground | Heated steering wheel switch signal | Input | Ignition switch ON | Heated steering wheel switch: While pressing | 0 V |
| Other than the above | Battery voltage | |||||
9 (LG) |
Ground | Sunload sensor signal (driver side) | Input | Ignition switch ON | 0 – 4.8 V Output voltage varies with sunload amount |
|
13 (P) |
Ground | Ignition power supply 2 | Input | Ignition switch ON | Battery voltage | |
15 (Y) |
Ground | Rear window defogger switch | Output | Ignition switch ON | ON | 0 V |
| OFF | 5 V | |||||
16 (G) |
Ground | Each door motor LIN communication | Input/Output | Ignition switch ON | ![]() |
|
17 (W) |
Ground | Each door motor power supply | Output | Ignition switch ON | Battery voltage | |
18 (W) |
Ground | Front blower motor control signal | Output |
|
![]() |
|
20* (BR) |
Ground | Heated steering wheel relay control signal | Output | Ignition switch ON | Within 30 seconds after turning ON the heated steering switch. | 0 V |
| Other than the above | Battery voltage | |||||
21 (P) |
— | CAN-Low | Input/Output | — | — | |
22 (B) |
— | Ground | — | — | — | |
23 (LG) |
Ground | Ignition power supply | Input | Ignition switch ON | Battery voltage | |
24 (V) |
Ground | Communication signal (A/C switch assembly→A/C auto amp.) |
Input | Ignition switch ON | ![]() |
|
26 (W) |
— | Sensor ground | — | — | — | |
27 (Y) |
Ground | In-Nissan Murano vehicle sensor signal | Input | Ignition switch ON | 0 – 4.8 V Output voltage varies with in-Nissan Murano vehicle temperature |
|
28 (P) |
Ground | Intake sensor signal | Input | Ignition switch ON | 0 – 4.8 V Output voltage varies with front evaporator fin temperature |
|
35 (P) |
Ground | Rear window defogger feedback | Input | Ignition switch ON | Rear defogger: ON | Battery voltage |
| Rear defogger: OFF | 0 V | |||||
36 (BG) |
Ground | Sunload sensor signal (passenger side) | Input | Ignition switch ON | 0 – 4.8 V Output voltage varies with front evaporator fin temperature |
|
37 (B) |
— | Ground | — | — | — | |
40 (G) |
Ground | ECV (electrical control valve) control signal | Output |
|
![]() |
|
*: With heated steering wheel
FAIL-SAFE FUNCTION
If a communication error exists between the A/C auto amp., and the AV control unit and preset switch for 30 seconds or longer, air conditioning is controlled under the following conditions:
| A/C compressor | : ON |
| Air outlet | : DEF |
| Air inlet | : FRE (Fresh air intake) |
| Blower fan speed | : AUTO |
| Set temperature | : Setting before communication error occurs |
| A/C compressor | : ON |
| Air outlet | : AUTO |
| Air inlet | : 20% FRE (20% fresh air intake) |
| Blower fan speed | : AUTO |
| Set temperature | : Setting before communication error occurs |
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart:
| Priority | Detected items (DTC) |
|---|---|
| 1 | U1000: CAN COMM CIRCUIT |
| U1010: CONTROL UNIT(CAN) | |
| B2796: FR SW COMM ERROR | |
| B27B0: A/C AUTO AMP. | |
| 2 | B2578: IN-Nissan Murano Vehicle SENSOR |
| B2579: IN-VEHICLE SENSOR | |
| B257B: AMBIENT SENSOR | |
| B257C: AMBIENT SENSOR | |
| B2581: INTAKE SENSOR | |
| B2582: INTAKE SENSOR | |
| B2630: SUNLOAD SENSOR | |
| B2631: SUNLOAD SENSOR | |
| B2632: DR AIR MIX DOOR MOT | |
| B2633: DR AIR MIX DOOR MOT | |
| B2634: PASS AIR MIX DOOR MOT | |
| B2635: PASS AIR MIX DOOR MOT | |
| B2636: DR VENT DOOR FAIL | |
| B2637: DR B/L DOOR FAIL | |
| B2638: DR D/F1 DOOR FAIL | |
| B2639: DR DEF DOOR FAIL | |
| 263D: FRE DOOR FAIL | |
| 263E: 20P FRE DOOR FAIL | |
| B263F: REC DOOR FAIL | |
| B2654: D/F2 DOOR FAIL | |
| B2655: B/L2 DOOR FAIL | |
| B2667: PASS SUNLOAD SENSOR | |
| B2668: PASS SUNLOAD SENSOR |
| DTC | Items (CONSULT screen terms) | Reference |
|---|---|---|
| U1000 | CAN COMM CIRCUIT | DTC Description |
| U1010 | CONTROL UNIT(CAN) | DTC Description |
| B2578 | IN-Nissan Murano Vehicle SENSOR | DTC Description |
| B2579 | IN-Nissan Murano Vehicle SENSOR | DTC Description |
| B257B | AMBIENT SENSOR | DTC Description |
| B257C | AMBIENT SENSOR | DTC Description |
| B2581 | INTAKE SENSOR | DTC Description |
| B2582 | INTAKE SENSOR | DTC Description |
| B2630* | SUNLOAD SENSOR | DTC Description |
| B2631* | SUNLOAD SENSOR | DTC Description |
| B2632 | DR AIR MIX DOOR MOT | DTC Description |
| B2633 | DR AIR MIX DOOR MOT | DTC Description |
| B2634 | PASS AIR MIX DOOR MOT | DTC Description |
| B2635 | PASS AIR MIX DOOR MOT | DTC Description |
| B2636 | DR VENT DOOR FAIL | DTC Description |
| B2637 | DR B/L DOOR FAIL | DTC Description |
| B2638 | DR D/F1 DOOR FAIL | DTC Description |
| B2639 | DR DEF DOOR FAIL | DTC Description |
| B263D | FRE DOOR FAIL | DTC Description |
| B263E | 20P FRE DOOR FAIL | DTC Description |
| B263F | REC DOOR FAIL | DTC Description |
| B2654 | D/F2 DOOR FAIL | DTC Description |
| B2655 | B/L2 DOOR FAIL | DTC Description |
| B2667* | PASS SUNLOAD SENSOR | DTC Description |
| B2668* | PASS SUNLOAD SENSOR | DTC Description |
| B2796 | FR SW COMM ERROR | DTC Description |
| B27B0 | A/C AUTO AMP. | DTC Description |
*: Perform self-diagnosis under sunshine. When performing indoors, aim a light (more than 60 W) at sunload sensor, otherwise self-diagnosis indicates even though the sunload sensor is functioning normally.




