Ventilation, Heater & Air Conditioner
Air Mix Door Motor
In this manual: Ventilation, Heater & Air Conditioner
~1min read
REMOVAL
Remove the center console side finisher (LH). Refer to Exploded View.
Remove the instrument lower panel LH. Refer to Removal and Installation.
Remove the screws (A) and the front foot duct (LH) (1).

Remove the air mix door motor (LH) screws.
Disconnect the harness connector from the air mix door motor (LH) and remove.
INSTALLATION
Installation is in the reverse order of removal.
REMOVAL
Remove the center console side finisher (RH). Refer to Exploded View.
Remove the glove box assembly. Refer to Removal and Installation.
Remove the screws (A) and front foot duct (RH) (1).

Remove the air mix door motor (RH) screws.
Disconnect the harness connector from the air mix door motor (RH) and remove.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?