Do-it-yourself

Battery replacement

5steps
~30min
2/5difficulty
Done 0 of 5

NISSAN INTELLIGENT KEY®

Nissan Murano. Battery replacement

Replace the battery in the Intelligent Key as follows:

  1. Remove the mechanical key from the Intelligent Key.
  2. Insert a small flathead screwdriver Nissan Murano. Battery replacement into the slit Nissan Murano. Battery replacement of the corner and twist it to separate the upper part from the lower part. Place a cloth over the screwdriver to protect the casing.
    Nissan Murano. Battery replacement
  3. Replace the battery with a new one.

    Recommended battery: CR2032 or equivalent.

    • Do not touch the internal circuit and electric terminals as doing so could cause a malfunction.
    • Hold the battery by the edges. Holding the battery across the contact points will seriously deplete the storage capacity.
    • Make sure that the + side faces the bottom of the lower part.
  4. Close the lid securely as illustrated with Nissan Murano. Battery replacement and Nissan Murano. Battery replacement .
  5. Operate the buttons to check the operation.

If you need assistance with replacement, it is recommended that you visit a NISSAN dealer for this service.

FCC Notice:

For USA:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.

For Canada:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.