Instruments and controls
Checking lights
In this manual: Instruments and controls
~1min read
With all doors closed, apply the parking brake, fasten the seat belts and place the ignition switch in the ON position without starting the engine. The following lights (if so equipped) will come on:
,
or
,
,
,
,
The following lights (if so equipped) come on briefly and then go off:
or
,
,
,
,
If any light fails to come on or operate in a way other than described, it may indicate a burned-out bulb and/or a system malfunction. Have the system checked. It is recommended that you visit a NISSAN dealer for this service.
Someindicators and warnings are also displayed in the vehicle information display between the speedometer and tachometer. For additional information, refer to “Vehicle information display” in this section.
Was this page helpful?