Suspension

Configuration (tire Pressure Monitoring System)

7steps
~42min
2/5difficulty
Done 0 of 7
Work Procedure

CHECK DATA PART NO. (TYPE ID)

  1. Use FAST (service parts catalog) to search TPMS “DATA PART NO. (TYPE ID)”.

  2. Write down “DATA PART NO. (TYPE ID)”.

>>

GO TO 2.

WRITE CONFIGURATION

CONSULT Configuration

  1. Select “Manual Configuration” of “AIR PRESSURE MONITOR”.

  2. Select the “DATA PART NO. (TYPE ID)” found using FAST (service parts catalog) to write the “DATA PART NO. (TYPE ID)” into the BCM.

>>

GO TO 3.

VERIFY DATA PART NO. (TYPE ID)

Compare the “DATA PART NO. (TYPE ID)” written into the BCM with the one found using FAST (service parts catalog) to confirm they match.

Do DATA PART NOs match?

YES>>

GO TO 4.

NO>>

GO TO 2.

PERFORM TIRE PRESSURE SENSOR ID REGISTRATION

Perform tire pressure sensor ID registration. Refer to Work Procedure.

>>

GO TO 5.

PERFORM SUPPLEMENTARY WORK

  1. Adjust the tire pressures for all tires to the recommended value. Refer to Tire Air Pressure.

  2. Perform self-diagnosis of all systems.

  3. Erase self-diagnosis results.

>>

Work End.