Cruise Control & Driver Assistance

Diagnosis and Repair Work Flow

9steps
~54min
3/5difficulty
Done 0 of 9
Work Flow

OVERALL SEQUENCE

DETAILED FLOW

INTERVIEW FOR MALFUNCTION

It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.

>>

GO TO 2.

SELF-DIAGNOSIS WITH CONSULT

CONSULT

  1. Perform “All DTC Reading”.

  2. Check if the DTC is detected on the self-diagnosis results of following:

    • “ICC/ADAS”: Refer to DTC Index.

    • “LASER/RADAR”: Refer to DTC Index.

    • “LANE CAMERA”: Refer to DTC Index.

    • “Side radar (Rear left)”: Refer to DTC Index.

    • “Side radar (Rear right)”: Refer to DTC Index.

    • "SONAR": Refer to DTC Index.

Is any DTC detected?

YES>>

Record or print self-diagnosis results and freeze frame data (FFD). GO TO 5.

NO>>

GO TO 3.

ACTION TEST

Perform system action test to check the operation status of the following:

  • BSW: Refer to Work Procedure.

  • RCTA: Refer to Work Procedure.

  • LDW: Refer to Work Procedure.

  • I-LI: Refer to Work Procedure.

  • I-DA: Refer to Work Procedure.

Check if any other malfunctions occur.

>>

GO TO 4.

SYMPTOM DIAGNOSIS

Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to Symptom Table.

>>

GO TO 6.

TROUBLE DIAGNOSIS BY DTC

CONSULT

  1. Erase self-diagnostic results.

  2. Ignition switch OFF → ON.

  3. Check the DTC in the self-diagnosis results.

  4. Perform trouble diagnosis for the detected DTC following:

    • “ICC/ADAS”: Refer to DTC Index.

    • “LASER/RADAR” Refer to DTC Index.

    • “LANE CAMERA”: Refer to DTC Index.

    • “Side radar (Rear left)”: Refer to DTC Index.

    • “Side radar (Rear right)”: Refer to DTC Index.

    • "SONAR": Refer to DTC Index

      .
>>

GO TO 6.

MALFUNCTIONING PART REPAIR

Repair or replace the identified malfunctioning parts.

>>

GO TO 7.

REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT)

CONSULT

  1. Erases self-diagnosis results.

  2. Perform “All DTC Reading” again after repairing or replacing the specific items.

  3. Check if any DTC is detected in self-diagnosis results of following:

    • “ICC/ADAS”: Refer to DTC Index.

    • “LASER/RADAR”: Refer to DTC Index.

    • “LANE CAMERA”: Refer to DTC Index.

    • “Side radar (Rear left)”: Refer to DTC Index.

    • “Side radar (Rear right)”: Refer to DTC Index.

    • "SONAR": Refer to DTC Index.

Is any DTC detected?

YES>>

GO TO 5.

NO>>

GO TO 8.

REPAIR CHECK (ACTION TEST)

Perform the following system action test. Check that the malfunction symptom is solved or no other symptoms occur:

  • BSW: Refer to Work Procedure.

  • RCTA: Refer to Work Procedure.

  • LDW: Refer to Work Procedure.

  • I-LI: Refer to Work Procedure.

  • I-DA: Refer to Work Procedure.

Is there a malfunction symptom?

YES>>

GO TO 4.

NO>>

Inspection End.