Diagnosis System (air Bag)
HOW TO PERFORM TROUBLE DIAGNOSES FOR QUICK AND ACCURATE REPAIR
Obtain information about the symptom.
WHAT - vehicle model
WHEN - date, frequencies
WHERE - road conditions
HOW - operating conditions, symptoms, passengers
Perform Preliminary Check.
Battery
Fuses
Harness connections
DIAGNOSIS METHODS
SRS “Self Diagnostic Result” can be read by using the AIR BAG warning lamp or CONSULT.
The User Mode is for the customer (driver). This mode warns the driver of a system malfunction through the AIR BAG warning lamp.
The Diagnosis Mode is for the technician. This mode helps the technician locate the malfunctioning circuit or part.
| Diagnosis tool | User Mode | Diagnosis Mode | Display type |
|---|---|---|---|
| AIR BAG warning lamp | X | X | ON/OFF |
| CONSULT | — | X | Monitoring |
USER MODE
Place the ignition switch from OFF to ON and check that the air bag warning lamp blinks.
Compare the blinking pattern with the examples in the table.

| Warning lamp | SRS condition | Reference item |
|---|---|---|
![]() |
|
— |
![]() |
|
Refer to For Frontal Collision or For Side and Rollover Collision. |
|
Refer to Air Bag Warning Lamp Does Not Turn Off. | |
![]() |
|
Refer to Air Bag Warning Lamp Does Not Turn On. |
CONSULT
DTC is displayed on “Self Diagnostic Result”.
“Self Diagnostic Result [PAST]” memory might not be erased. Refer to SRS Final Check.
SRS system malfunctions intermittently. Refer to Inspection Procedure.
SRS HISTORY CHECK
Check repair history of the SRS. If no repairs have been made, perform SRS Operation Check. If repairs have been made, GO TO step 2.
Erase “Self Diagnostic Result [PAST]” after repair. Refer to SRS Final Check.
DIAGNOSIS MODE
CONSULT
Confirm that zero point reset of OCS is complete.
If no DTCs are detected on “Self Diagnostic Result [CURRENT]”, repair of SRS is completed. Go to step 3.
If any DTCs are detected on “Self Diagnostic Result [CURRENT]”, the malfunction has not been repaired completely or another malfunction is being detected. Perform SRS Operation Check again. Refer to SRS Operation Check.
Select “ERASE”.
Check that no malfunction is detected in “Self Diagnostic Result [PAST]”.
Exit Diagnosis Mode and disconnect the CONSULT.
Perform SRS Operation Check. Refer to SRS Operation Check.
APPLICATION ITEMS
CONSULT can display each diagnostic item using the diagnostic test modes shown following:
| Diagnostic Test Mode | Diagnostic Item | Description |
|---|---|---|
| Self Diagnostic Result | SELF DIAGNOSTIC RESULT [CURRENT] | A current “Self Diagnostic Result” (also indicated by the number of warning lamp flashes in the Diagnosis mode) is displayed on the CONSULT screen in real time. This refers to a malfunctioning part requiring repairs. |
| Data Monitor | DATA MONITOR | Displays air bag diagnosis sensor unit input/output data in real time. |
| ECU Identification | ECU DISCRIMINATED NO. | Air bag diagnosis sensor unit ECU discriminated number (identification number) or part number is displayed. Air bag diagnosis sensor unit has individual ECU discriminated number (identification number) or part number based on model and equipment. |
| TROUBLE DIAG RECORD | TROUBLE DIAG RECORD [PAST] | With “TROUBLE DIAG RECORD”, diagnosis results previously erased by a reset operation can be displayed on the CONSULT screen. |
| Configuration | CONFIGURATION |
|
CONSULT can display each diagnostic item using the diagnostic test modes shown following:
| Diagnostic Test Mode | Diagnostic Item | Description |
|---|---|---|
| Work support | Zero point reset function | Perform zero point reset. Refer to Special Repair Requirement. |
| Data Monitor | Buckle Switch Status (Comm) [Not Moni/Moni(wir)/Frm ACU] |
Displays the status of the seat belt buckle switch (passenger side) signal.
|
Buckle Switch Spec [Not Moni/Nor Op/Nor Cl/ Frm ACU] |
Displays the spec of the seat belt buckle switch (passenger side).
|
|
Buckle Switch Status [Not Moni/Unfasten/ Fasten/Reload] |
The switch status input from seat belt buckle switch (passenger side).
|


