Suspension

Diagnosis System (air Pressure Monitor)

~4min read
CONSULT Function (AIR PRESSURE MONITOR)

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM:

Diagnosis modeFunction Description
ECU Identification Parts number of BCM can be read.
Self Diagnostic Result
  • Retrieve DTC from ECU and display diagnostic items.

  • Self-diagnostic results and freeze frame data can be read and erased quickly.*

Data Monitor Monitor the input/output signal of the control unit in real time.
Work support This mode enables a technician to adjust some devices faster and more accurately.
Active Test The BCM activates outputs to test components.
Re/programming, Configuration
  • Read and save the Nissan Murano vehicle specification (TYPE ID).

  • Write the vehicle specification (TYPE ID) when replacing BCM.

ECU IDENTIFICATION

BCM part number can be read.

SELF DIAGNOSTIC RESULT

Refer to DTC Index.

FREEZE FRAME DATA (FFD)

The following vehicle status is recorded when DTC is detected and is displayed on CONSULT:

Item nameDisplay item
SET AIR PRESSURE 2 FL Set air pressure 2 front left
SET AIR PRESSURE 2 FR Set air pressure 2 front right
SET AIR PRESSURE 2 RR Set air pressure 2 rear right
SET AIR PRESSURE 2 RL Set air pressure 2 rear left
WARNING AIR PRESSURE FL Warning air pressure front left
WARNING AIR PRESSURE FR Warning air pressure front right
WARNING AIR PRESSURE RR Warning air pressure rear right
WARNING AIR PRESSURE RL Warning air pressure rear left
AIR PRESS FL Air pressure front left
AIR PRESS RL Air pressure front right
AIR PRESS RR Air pressure rear right
AIR PRESS RL Air pressure rear left
SET TEMPERATURE Set temperature
TIRE TEMPERATURE FL Tire temperature front left
TIRE TEMPERATURE FR Tire temperature front right
TIRE TEMPERATURE RR Tire temperature rear right
TIRE TEMPERATURE RL Tire temperature rear left

IGN COUNTER

(0 - 39)

The number of times that ignition switch ON after the DTC is detected is displayed.

  • When “0” is displayed: It indicates that the system is presently malfunctioning.

  • When except “0” is displayed: It indicates that system malfunction in the past is detected, but the system is presently normal.

DATA MONITOR

Monitor Item (Unit)Description
VHCL SPEED SE (mph or km/h) Indicates Nissan Murano vehicle speed.
AIR PRESS FL (psi, kPa, or kgf/cm2) Indicates air pressure of front LH tire.
AIR PRESS FR (psi, kPa, or kgf/cm2) Indicates air pressure of front RH tire.
AIR PRESS RR (psi, kPa, or kgf/cm2) Indicates air pressure of rear RH tire.
AIR PRESS RL (psi, kPa, or kgf/cm2) Indicates air pressure of rear LH tire.
LOW TIRE PRESSURE W/L (Off/On) Indicates condition of low tire pressure warning lamp in combination meter.
BUZZER 2 (Off/On) Indicates condition of buzzer in combination meter.
HORN (Off/On) Indicates condition of horn.
HAZARD (Off/On) Indicates condition of hazard.
WARNING AIR PRESSURE FL (psi, kPa, or kgf/cm2) Indicates warning air pressure front LH tire.
WARNING AIR PRESSURE FR (psi, kPa, or kgf/cm2) Indicates warning air pressure front RH tire.
WARNING AIR PRESSURE RR (psi, kPa, or kgf/cm2) Indicates warning air pressure rear RH tire.
WARNING AIR PRESSURE RL (psi, kPa, or kgf/cm2) Indicates warning air pressure rear LH tire.

WORK SUPPORT

Support ItemDescription
ID REGIST Refer to Description.

ACTIVE TEST

Test ItemDescription
ID REGIST WARNING This test is able to check that the buzzer sounds or the low tire pressure warning lamp turns on.
WARNING LAMP This test is able to check that the low tire pressure warning lamp turns on.
FLASHER This test is able to check turn signal lamp operation.
HORN This test is able to check horn operation [On].

RE/PROGRAMMING, CONFIGURATION

Configuration includes the following functions.

FunctionDescription
Read/Write Configuration Before replacing ECU
  • Allows the reading of Nissan Murano vehicle specification (Type ID) written in BCM.

  • Allows the reading of vehicle specification (Type ID) store in CONSULT.

After replacing ECU Allows the writing of Nissan Murano vehicle information (Type ID) stored in CONSULT into the BCM.
Manual Configuration Allows the writing of Nissan Murano vehicle specification (Type ID) into the BCM by hand.